Mounted in seconds - excellent grip
That is EasyMount

Insert the Thinplate
Thinplate1
Thinplate2

Place the Thinplate in the battery cover or the phone case of your Smartphone. We recommend to fix the Thinplate with the supplied adhesive strips in the phone cover, to prevent slipping.

CLASSIC
Classic_Step_1

Look for a seam in your dashboard- If it is possible to push a . plastic card at least 1cm in the seam you are , ready to install EasyMount Classic.

Classic_Step_2

Use the mounting wedge and push the EasyMount Classic into the seam like you did it before with the plastic card. After installation remove the mounting wedges.

AIR
step1_air

Insert the threaded bold into the air vent.

step2_air

Tighten the screw with the enclosed mounting cross.

X-Vent
X-Vent1

Adjust the angle of the bracket. Fix the angle by turning the nut.

X-Vent2

Screw the bracket onto the ventilation nozzle.

C-Vent
C-Vent1

Adjust the angle of the bracket. Fix the angle by turning the nut.

C-Vent2

Screw the bracket onto the ventilation nozzle.

BRACKETS
brackets_step1

EasyMount Bracket is screwed on a phone bracket like (Brodit, Kuda, Dashmount, Haweko, etc.) ..

brackets_step2

Your phone bracket is installed in your car..

Tube
montage-Tube-1

Put the two cable ties into EasyMount Tube.

montage-Tube-2

Stick the enclosed rubber around the pole. (Only Necessary on smooth surfaces.)

montage-Tube-3

Secure the bracket to the handlebar, by tightening the cable ties.

Finished!

X-Card
X-Card-Aufstellen-1

X-Card aufklappen

X-Card-Aufstellen-2

Den gewünschten Neigungswinkel einstellen.

X-Card-Aufstellen-3

Handy oder Tablet aufstellen.

Finished!

NOTE

handy2_7The EasyMount brackets are strong enough, to hold any mobile device. In product tests, a force could be determined by 1 kg. However we recommend to mount mobile devices with a screen diagonal up to 7″ and. to a maximum weight of 300 g.

Please note, the holding force depends on the thickness of the battery cover of the mobile phone. or the thickness of the phone cover. To double the grip, we recommend to use 2 Thinplates. when using thick phone covers..